Image of restoration and renovation after fire. Worker removes damaged paint layer from wall and ceiling indoors.

What Is Fire Damage Restoration?

Fire damage restoration is a process that is used to clean up and repair the damage caused by a fire. The process includes extracting water from damaged areas and cleaning porous surfaces. It may also involve removing mold. These services are critical to restoring your property to its pre-fire state. However, there are several important things to remember when considering a fire restoration project.

Water extraction used to extinguish a fire

Water is a popular fire-fighting agent because of its excellent fire suppression properties. It works by reducing the temperature of the fuel to a point where it cannot produce enough vapor to sustain a fire. To make water efficient in reducing the temperature, it must first reach a negative heat balance – the rate of heat production must be lower than the rate of heat loss.

The main reason for this is that water vapor has a strong cooling effect and is a great heat absorber. It will also displace oxygen from the fire area. To be effective, liquid water can be atomized into small droplets and sprayed onto the fire. A mist of water is especially effective in putting out grease and oil fires.

Another liquid used in firefighting operations is nitrogen.

Nitrogen is colorless and odorless. Its density makes it easier to displace oxygen from the air surrounding the fire. The gas has a maximum operating pressure of 300 bar and is produced from the combustion of hydrogen. Unlike water, nitrogen does not contain oxygen and therefore, is not toxic.

Water is also a natural fire suppressant. Water cools down the combustible material below its ignition temperature, which is a key component of fire. Fire can also be controlled by smothering it, cooling it down, and starving it. Once these components have been removed, the fire will no longer burn.

The technique of water mist produces higher rates of heat extraction while using less water. This method has been known in expert circles for years. However, the use of nozzle technology limited its range to just a few meters. This problem was overcome when propeller turbines were developed to spray water.

Cleaning and decontaminating damaged areas

During the restoration process, cleaning and decontaminating damaged areas is a critical step. The soot and other residue left behind by the fire are toxic and may affect the structural integrity of the building and its contents. The removal of this residue is critical to the life expectancy of electrical appliances. In addition, pipes that burst during the fire often contain sewage or greywater, which contains bacteria and viruses.

It is vital to use a proper mask and protective clothing while working on decontamination. You should also change your shoes. Water from the affected area should not be used for personal hygiene or food preparation. If possible, use bottled or boiled water. If the affected area has a well, notify the local permitting agency about the potential for contamination.

Cost of fire damage restoration

Fire damage restoration can be an expensive task. Even a small fire can leave extensive damage. Water damage can also be costly. It’s important to take immediate action to prevent further damage. Costs vary, depending on the location and range of damage. It’s also important to factor in the cost of replacing lost possessions and residual smoke damage.

The cost of fire damage restoration depends on the type of fire. According to the Fire Equipment Manufacturers’ Association, there are five main types of fires. Each type of fire can have multiple types, depending on the materials involved. In most cases, the damage restoration costs are dependent on the type of fire.

If you’ve recently had a fire, you may need to hire a fire damage restoration company to help you clean up the area. Fire damage can lead to many problems, including soot, ash, and corrosion caused by the fire. Additionally, the moisture and heat from the fire may lead to mold growth. The sooner this process is completed, the less costly the restoration project will be.

Water Resto USA is the fire damage restoration company you can trust. We have years of experience in the industry and know how to handle all aspects of fire damage restoration. From start to finish, we will work diligently to restore your home or business back to its pre-loss condition. We understand the importance of your property and will do everything possible to get the job done right.

We understand that dealing with fire damage can be a stressful and overwhelming experience. That is why we offer 24/7 emergency services. We will be there when you need us, day or night.

If you are in need of fire damage restoration, call Water Resto USA today. We will work quickly and efficiently to get your life back to normal.

Water Resto USA Logo Image for Blog Posts


Water Resto USA provides around-the-clock Fire Damage Restoration Services, 24/7, 365 days a year! Call for a free quote and receive $99 OFF!

Get a Quote
Get a Quote